How to Enter Unlock Codes on BlackBerry 8800 Pearl or 8300 Curve:

You must have a SIM card in your phone to complete these steps; does not matter if sim is active or not.

1. Go to settings menu => and then Options
3. Select Advanced options => and then Sim card
5. Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
6. Hold the ALT Key while typing in MEPE on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
8. You should be presented with a prompt "Enter Network MEP Code". Type in the 16 digit unlock code received from UnlockToTalk.com and press in the track wheel / jog dial to confirm
9. Your phone is now unlocked

Blackberry 8100 Unlock Code Entry Instructions

How to Enter Unlock Codes on BlackBerry 8100 Pearl:

Go to Options Menu => Advanced Options
In the SIM Card menu, hold down the shift (right of the zero, cap) press meppd
You'll see the unlocking level screen there you hold the ALT key (left side below @) type mepp2 (*You won't see any text while you are typing either one of these.)
Enter the unlock code.

Blackberry 8700 Unlock Code Entry Instructions

How to Enter Unlock Codes on BlackBerry 8700:

8700c Unlocking Info

***** You must have a SIM card in your phone to complete these steps, I have found that this procedure works best with an AT&T or Cingular Sim card in the phone ( Can be active or inactive ) Make sure the phone is not displaying the low battery warning! *****

go to settings
go to options
go to advanced options
go to sim card
Type MEPD (not case sensitive) (you will not see text appear on screen while typing)
Does it say Network active? if so your phone is locked
Hold the ALT Key while typing in MEPE (not case sensitive, and you will not see text appear on screen while typing)
It will say "Enter Network MEP Code, then you type in the 16 digit unlock code, press in the jog dial to confirm.
Your phone is now unlocked

BlackBerry 6xxx 7xxx: ie 6230, 7100, 7290 etc.. Unlock Code Instructions

How to Enter Unlock Codes on BlackBerry 6xxx 7xxx: ie 6230, 7100, 7290 etc..

Select Options menu on BB.
Now you select SIM CARD menu. To be able to see this you have to type this on the keypad on phone : (TEXT WILL NOT APPEAR ON THE SCREEN until you enter the unlock code)
Type 'MEPD' for all models except 7100 in which case in case use 'MEPPD'.
Usually u should see "active" NET lock. Now in order to disable this lock type 'MEP2' respectively 'MEPP2' if phone is 7100 and will appear a dialog asking for code. NOTE: You must use the "alt" or "shift" key to enable numbers so example would be: m-e-p-"alt key"-2 Now you should see the place to enter your net unlock code.(if not, you didn't type in mep2 or mepp2 properly.)
Here you must enter the "NET Unlock Code" that the bb unlocker showed you and hit return.

Treo 680,650 600 Unlock Code Entry Instructions

How to Enter Unlock Codes on Treo 600, 650 and 680 Cell Phones

Remove Treo battery, unplug cable
Insert incorrect SIM card (Any simcard that the phone does not accept)
Power on Treo-650, 'Sim not allowed' is displayed, click OK
Go to the dial pad, and use the stylus to enter MEP code . You must enter the code in the following fashion:
- *#*#(MEP-CODE)# then press dial (Where (MEP-CODE) is to be replaced by the ACTUAL code supplied by the unlocking software)
- For example if the software supplied 12345678 as your MEP code for your phone , you must enter the code as follows:
  
  *#*#12345678# , then press dial
  
  Again the above numeric code is for illustration purposes, please enter the MEP code as supplied by the unlock software.
Phone will reset and display sim lock removed

TREO 750 Unlock Code Entry Instructions

How to Enter Unlock Codes on the Treo 750

Insert a non native sim card (didn't come with the phone) and when prompted for unlock code enter the code you were given.

Cingular BlackJack Unlock Code Entry Instructions

How to Enter Unlock Codes on a Cingular BlackJack

Insert disallowed simcard (a simcard that the phone does not usaully accept) and enter unlock codes when prompted
- NOTE: If you are unable to connect to service provider or unable to make out going calls or recieve messages, this has nothing to do with your phone being locked or not, you need to force the BlackJack to change to GSM mode, this can be done as follows:
- Power on your Phone
- Enter *#1546792*#
- Select Option 3 Network & Call Settings
- Select option 5 Network Mode
- Select GSM
This should resolve your problem.

HP iPaq Unlock Code Entry Instructions

How to Enter Unlock Codes on HP iPaq series phones (iPaq 6315, 6325, 6300, 6515 , etc)

On the Today screen, tap Start > Settings.
Tap the Phone Band icon.
Tap the Keyboard icon to open the virtual keyboard
Tap Shift and then Ctl key to enable the keys.
Tap the blank area below the band selection box to open the unlock tool.
Tap Shift and then Ctl to disable the keys.
Enter the 8-digit unlock code and tap OK when done.
Wait for the device to validate the unlock code (about five seconds). You will see one of the following screens:
- Unlock successful.
- Unlock failed due to incorrect code. The user has three attempts to unlock. After three attempts, the device will refuse any more unlocking attempts. Perform a soft reset to reset the counter to perform additional unlocking attempts.
- Device is not ready for unlocking. This error message displays when the user tries to unlock when the phone application (not the device) is not in a steady state. It takes 30 seconds after powering on the phone for it to reach a steady state.

Sony-Ericsson Unlock Code Entry Instructions

How to Enter Unlock Codes on Sony-Ericsson Cell Phones

Switch ON your phone without Sim card
Press 1 time the left arrow
Press 2 times the button *
Press 1 time the left arrow
'Personalize with MNC2' will appear
You can now enter your unlock code
- If your phone has a 'JOGDIAL' (ex : SonyEricsson K700i) you must press 'Down arrow' instead of 'Left arrow' for step 2 & 3. We mean by 'Down arrow'' to direct the Jogdial down.

Motorola Subsidy Unlock Code Entry Instructions

How to Enter Subsidy/Unlock Codes on Motorola Cell Phones

Switch ON your phone with a Sim card that didn't come with the phone
The phone shows 'Enter Special Code' or 'Enter Subsidy Code' and you can now enter your unlock code
- Note: If you get the prompt "Contact Service Provider" or "Phone Blocked" , leave your phone on at that prompt for up to 8 hours. This will reset the phones internal timer and automatically change the prompt to "Enter Subsidy Code" , then you should enter the unlock codes exactly as provided.

LG Unlock Code Entry Instructions

How to Enter Unlock Codes On LG Mobile Phones

Model : LG F2250
- With orange sim card in the start menu tape : 2945#*3311# handset show saved then return to startup screen press Menu key, choose Settings > Security > Sim Lock> Network > Deactivate, handset will now show 'Enter NCK' tape your unlock code and OK.
Model : LG U8110
- With a not allowed sim card in your phone enter Pin code then validate tape : 277634#*#, select 'Sim Unlock' menu enter NCK code then validate, your phone is now unlocked.
Model : LG U8210
- With a not allowed sim card enter Pin code then validate tape : 277634#*#, now you show test menu choose Sim test menu and tape : 2945#*#, choose Sim Unlock menu, handset show 'Enter NCK' tape code Simlock, then OK.
Model : LG U8150
- Switch ON your phone with a not allowed Sim card, compose : 277634#*#, go to menu 'Sim Lock' and enter your unlock code.
Model : All Others
- Switch ON your phone with an allowed sim card and compose :
  - 2945#*5101# - LG 510w
  - 1945#*5101# - LG 1200 & B1200
  - 2945#*5221# - LG 5200 & 52200
  - 2945#*5301# - LG 5300
  - 2945#*5401# - LG 5400
  - 2945#*70001# - LG 7020
  - 2945#*7101# - LG 7100
  - 2945#*1201# - LG 1100 & 1300
  - 2945#*70001# - LG 7250T & 1100
  - 2945#*2201# - LG C2200
  - 2945#*5301# - LG T5100
  - 2945#*3311# - C3310
- Go to 'Menu' and then to 'Settings', select 'Security', to finish select 'Network Provider' and select 'Desactivate' then type your unlock code.

LG CU-500 Unlock Code Entry Instructions

How-To Enter Unlock Codes on LG CU500 mobile phones:

Insert a non-Cingular SIM card into your LG CU 500 and power on your phone
When you get the invalid sim-card message/prompt, enter 159753#*# on your phones keypad
On the next screen enter the unlock code provided than press OK.

Samsung D807 Unlock Code Entry Instructions

How-To Enter Unlock Codes on a Samsung D807 mobile phone:

Switch on your phone with a non-accepted SIM card. The phone will ask for 'Password'.
You can now enter your unlcok code. (Even if phone doesn't ask for a password, enter the unlock code)
If 'Insert Correct SIM card' message appears: enter #0111*code#

Just A Few Of The Many Supported Cingular & AT&T Models:

Pantech C300

HP iPAQ HW6510/HW6515

HP iPAQ HW6310/HW6315

Cingular 2125 Smartphone,

Cingular 8125 Pocket PC Phone

All Motorola

All Samsung

All LG

All Sony Ericsson

All Nokia

All BlackBerry

All Palm Treo

All Ipaq

All Smart Phones

All Pantech

All Siemens

All Panasonic

We can provide unlock codes for the models listed below and more!

BlackBerry:

BlackBerry 6210, BlackBerry 6230, BlackBerry 6710, BlackBerry 7730, BlackBerry 7750, BlackBerry 7780, BlackBerry 7520, BlackBerry 7290, BlackBerry 7250, BlackBerry 7230, BlackBerry 7280, BlackBerry 7100v, BlackBerry 7100g, BlackBerry 7100i, BlackBerry 7100r, BlackBerry 7100t, BlackBerry 7105t, BlackBerry 8100 Pearl, BlackBerry 8700c, BlackBerry 8800, BlackBerry 8300, Pearl, Curve, BlackBerry 7130c

Motorola

Motorola A Series: A630, A830, A835, A840, A845, A920, A925, A1000

Motorola C Series: C115, C116, C117, C118, C155, C156, C157, C236, C250, C260, C266, C268, C330, C331, C332, C333, C334, C335, C336, C350, C350g, C350L, C350V, C353, C355V, C359V, C370, C380, C385, C390, C450, C450L, C550, C650, C651, C975, C980

Motorola E Series: E1 Rokr, E1000, E370, E365, E375, E378i, E380, E396, E398, E550, E920

Motorola L Series: L2, L6, L7 Slvr

Motorola V Series: V3 Razr (including RSA bootloader 8.26), V60, V60e, V60g, V66, V66e, V66g, V60i, V66i, V70, V70e, V80, V150, V151, V170, V171, V180, V186, V188, V220, V226, V290, V300, V303, V330, V400, V500, V501, V505, V525, V525M, V535, V547, V545, V550, V551, V555, V600, V620, V635, V690, V750, V872, V878, v975, V980, v1050

Motorola T Series: T280, T280i, T720, T720e, T720g, T720i, T721, T722i, T725e

Motorola U Series: U6 Pebl

Sendo Series: 2xx/S3xx/P2xx/M5xx/S6xx: SND200, SND230, P200, P230, M550, S600, SND800 and others

MPX Series: MPX200, MPX220

Newer Supported Motorola Models :

A Series: A1000 (Newer Versions)

C Series: C365x, C38X, C390, C975, C980

E Series: E1 Rokr, E1000, E770, E1070

K Series: K1 Krzr

L Series: L2, L6, L7 Slvr

M Series: M1000

U Series: U6 Pebl

V Series: V3i, V3r, V3t, V3x Razr, V190, V195, V235, V360, V557, V975, V980, V1050

Z Series: Z3 Rizr

Sony Ericsson

A Series: A3618s
D Series: D750 D750i
K Series: K300, K500c, K506c, K508i, K508c,K510a,K510i,K510c, K700i, K600, K608i, K700c, K750i, K610i, K800i, K790i
F Series: F500i, K500i,
J Series: J200i, J200c, J210a, J210i, J230,J230c, J300, J300c
K Series: K300, K500c, K506c, K508i, K508c,K510a,K510i,K510c, K700i, K600, K608i, K700c, K750i, K610i, K800i, K790i,
K800i (Flashing Only)
P-Series: P800, P802, P900, P908, P910i, P910a, P910c
R Series: R520m, R520mc, R600
S-Series: S700i, S700c and S710a
T-Series: T100, T105, T200, T226, T226s, T230, T238, T226m, T237, T237s, T290a, T290i, T290c, T300, T306, T310, T312, T316, T39m, T600, T610, T616, T618, T62u, T630, T628, T637, T65, T66, T68m, T68i,T68ie
V Series: V600i, V800, V802SE V630i
W Series: W300, W300c, W300i, W550i, W600i, W800i, W810i ,W900i, W700i, W700c
Z Series: Z200, Z200a, Z800i, Z1010i, Z1010c, Z500i, Z500a, Z520i, Z520ic, Z520a, Z500c,Z525, Z600, Z608

Nokia

DCT3: 2100, 3210, 3310, 3315, 3330, 3350, 3390, 3410, 5110, 5110i, 5130, 5138, 5190, 5210, 5510, 6090, 6110, 6130, 6138, 6150, 6190, 6210, 6250, 7110, 8210, 8250, 8290, 8810, 8850, 8855, 8890, 9110
DCT4: DTE-1_D211,1100, 1100a, 1100b, 1101, 1110, 1220, 1260, 1261, 1600, 2112, 2220, 2221, 2260, 2261, 2270, 2275, 2280, 2285, 2300, 2300a, 2600, 2600cn, 2650, 2651, 3100, 3100b, 3105, 3108, 3120, 3125, 3200, 3200b, 3205, 3220, 3220b, 3300, 3300b, 3320, 3360, 3510, 3510i/3530, 3520, 3560, 3585, 3585i, 3586i, 3570i, 3585, 3585i, 3590, 3595, 3650, 3660, 5100, 5100a, 5140b, 5140, 5140i, 6010, 6011i, 6012, 6015, 6016, 6019, 6020, 6020b, 6021, 6030, 6030a, 6060, 6061, 6100, 6101, 6102, 6108, 6111, 6170, 6170b, 6200, 6220, 6225, 6230, 6230b, 6230i, 6255, 6256, 6310, 6310i, 6340, 6340i, 6360, 6370, 6385, 6500, 6510, 6560, 6585, 6590, 6600, 6610, 6610i, 6620, 6650, 6670, 6800, 6800a, 6810, 6820, 6820a, 6820b, 6822a, 7200, 7200b, 7210, 7250, 7250i, 7260, 7270, 7280, 7360, 7380, 7600, 7610, 7650, 7710, 8270, 8280, 8310, 8390, 8800, 8910, 8910i, 9300, 9300i, 9500
DCT-L 9210, 9210i, 9290
WD2: N-Gage, N-Gage QD, N-Gage QDa, 3230, 3600, 3620, 3650, 3660, 6260, 6600, 6670, 6670b, 7610, 7610b, 7650

Samsung

A series: A800C
C series: C100, C110, C120, C200, C210, C225, C230
D series: D100, D307, D347, D357, D410, D415, D428, D488, D500, D500E, D508, D510, D520, D550, D600, D710, D720, D730, D800, D820
E series: E100, E105, E217, E300, E310, E315, E316, E317, E318, E320, E330, E335, E340, E350, E360, E400, E418, E530, E560, E600, E610, E620, E630, E635, E640, E650, E700, E710, E715, E720, E730, E740, E750, E760, E770, E800, E810, E820, E850, E860, E870, E880, E910
I series: I300, I500, I505, I700
N series: N700, N710
P series: P100, P207, P300, P400, P510, P518, P705, P710, P720, P730, P735, P738, P777, P850
R Series: R225, All other Rxxx
S series: S100, S105, S200, S300, S300m, S341i, S342i, S400i, S410i, S500, S500i
T Series: T100, T108, T609, T309, T619, T719, T809
V series: V100, V200, V205, V804SS
X series: X100, X105, X120, X138, X140, X150, X156, X200, X300, X400, X426, X427, X430, X450, X460, X466, X475, X480, X486, X490, X495, X497, X507, X600, X610, X620, X630, X636, X640, X660, X700, X770, X800, X810, X900
Z series: Z100, Z105, Z107, Z110, Z130, Z140, Z150, Z300, Z320, Z500, Z510, Z540, Z700, ZM60, ZV10, ZV30, ZX10

3000, 3100, 4010, 4011, 4015, 4020, 4050, 510, 5200, 5210, 5220c, 5208, 5300, 5300i, 5310, 5400, 7100

A series: A7110, A7150
B series: B1300
C series: C1100, C1200, C1300, C1300i, C1500, C2000, C2200, C3100, C3300, C3310, CU500
F series: F2100, F2300, F2400, F7250T, F9100
G series: G650, G1500, G3100, G4010, G4011, G4015, G4020, G4050, G5310, G5400, G5410, G5500,G7000, G7020, G7030, G7050, G7070, G7100, G7110, G7120, G8000
L series: L1100, L1150, L1400, L1400i, L3100, L5100
T series: T5100
U series: U8110, U8120, U8138, U8150, U8180, U8200
W series: W7000, W7020, W7030

.Pantech:

C300, G700, PG1500, PG3200

THE CELL PHONE CODES:

Bosch 718

Bosch 738

Bosch COM607

Bosch 908

Remove the network lock permanently
*#9103#
Remove the subset lock permanently
*#9104#

Bosch 909/909s

Ericsson 688 Secrets

Shortcut for Last Dialed call menu
If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key stroke instead: First '0' then '#'.
Bat. level indicator when turned OFF...
When the gh688 is turned off and the phone is not changing - the bat. level can be seen for a short period of time by pressing the 'NO' key quick once (it has to be quick!) and then wait for about 2 sec. The bat. level will now be shown in the display at its normal position.

Access menu without Sim card
To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?, Mail, Phone book.
NOTE: If you try this on the GH688 your phone may stop at Keylock On? menu and you´ll have to take your battery out to turn the phone on again.

Full Network Name
You can see the Full Network Name by doing the following:
Go to the network menu, when the phone displays the networks available (in 'Select net' and 'Edit list' menu) you can press * and you will see the full name.

Full Operator List
You can view the full operator list by doing the following:
Go to the 'Edit list' menu under 'networks'. The phone say 'please wait' (searching for other networks). When finished, Press the < key once, then YES twice. Now the phone displays the full list. Browse through the list with the < > keys.

How to enable net monitor on Ericson 688
1. Remove SIM from phone
2. Dial 112, press YES, hear something,
3. Dial 112YESNO
4. Press < before SETTINGS
5. Then YES, <, then u will see NM on?
6. press YES

Ericsson 628 Secrets

Shortcut for Last Dialed call menu
If for some reason you don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key stroke instead: First '0' then '#'.

Battery level indicator when turned OFF
When the phone is turned off and the phone is not changing - the battery level can be seen for a short period of time by pressing the 'NO' key quick once (it has to be quick!) and then wait for about 2 sec. The battery level will now be shown in the display at its normal position.

Alarm Clock Menu
Go to MissedCall
Empty the list
Press the -> key for a second or two
The option Menu size turns up
Choose 'yes' and go from there.

Free phone calls using the GA628

Motorola Flare Secrets

You now have to press the [MENU] and scroll to the 'Eng Field Options' function with the keys, and enable it.

Get Distance From Base Station - Place a call, when it is answered, press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'Time Adv xxx' appears, where xxx is a number. Multiply this number by 550, and the result is the distance from the RBS (Radio Base Station), in meters.

Get Signal Quality - press [MENU] until 'Eng Field Option' is displayed, press [OK], select 'Active Cell', press [OK], press [MENU] until 'C1' appears. This is the signal quality. If it becomes negative for longer than 5 seconds, a new cell is selected.

NEC DB2000 Secrets

SP Lock info
The procedure will show if your phone is locked.
*#3210# for SIM lock info,
*#8140# for Net lock info.

SIM lock
*#4960 # - Inquiry * 4960 * password * password # (send?) to Lock
#4960* password # to Unlock
[password] is an 8 digits number

Net Lock
*#7320# - Inquiry * 7320 * password * password # to Lock.
#7320* password # to Unlock.
[password] is an 8 digits number

Net Lock 2
*#2220# - Inquiry * 2220 * password * password # to Lock
#2220* password # to Unlock
[password] is an 8 digits number

Subnet Lock
*#1110# - Inquiry * 1110 * password * password # to Lock
#1110* password # to Unlock
[password] is an 8 digits number

Nokia 8110 Secrets

87267 (OK) Transfers ALL phone numbers, pictures, sounds from one phone to another

Hands Free
To continue an existing call when placing the 8110i into the hands free car kit without it dropping the call, press the Memory button just before connecting the cable and placing it in the cradle.

Display extra text in call costs feature
If your network operator doesn't offer a call costs service, you can still make use of that function to display some personalised text on the screen of your 8110i. Go to Menu, [5], [7], [1], enter PIN2-code and choose Set. Then type in the limit of the currency units you're using (if the call cost service worked, you would have to type the cost limit of the calls) and choose OK. In this case I typed 8110. Then go to the next submenu (Menu, [5], [7], [2]), the Show costs in menu. Type in the PIN2 code again and select Currency. Type in the unit price, in this case number 1. Then type the name of the currency - you can use any string of letters and numbers 1-3 characters long. then type 2 letter then to confirm type two names beginning with one of each of the letters. Then press OK to confirm it.

Quick saving while in call
Saving numbers to memory during a call If you type a number into your phone during a call, you will lose it when the call ends. To prevent this happening just hold down Memory button -- the number will be saved (with no name) to the next available memory location.

Deleting SMS messages quickly
When reading an SMS message, instead of pressing Option, Erase to delete the message, simply press [C].

Turning lights on temporarily
If you have display lights turned off, you can turn them on by quickly pressing and releasing the power button. They will stay on as long as you are pressing button.

Silent mode temporarily
You can put your phone into silent ringing mode temporarily by pressing Menu then [#].

Closing the cover without ending a call
If you press the menu key and then close the sliding cover during a call you will not end your call.

Nokia 6150 Secrets

87267 (OK) Transfers ALL phone numbers, pictures, sounds from one phone to another

Power Button Tip
If you press the button for a short moment, the menu with the profiles is shown on the display. If you press one more time, the mobile turns itself off. You can use the up and down cursor keys to scroll and enable a different alert setting.

The 54# Tip
Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.

Toggle Headset and Auto settings
#1: Try Connect the pin-out 1-2 (in front from the right.) to toggle headset settings (The phone will think that you ar using a headset - "headset" is displayed in the LCD)
#2:Try Connect the pin-out 2-3 (in front from the right.) to toggle auto settings (The phone will think that you ar using it in the car - "auto" is displayed in the LCD)

Call Menu
(In a call) you can press and hold down the menu button for 3 sec. and a menu appears. (transfer, mute etc.)

Quick SMS Typing
When typing SMS messages, you have to wait some seconds before you can type the next letter if it is in the same button than the previous one. For example try to write the word "letter", you have to wait before you can enter the second "t". A much faster solution is to press the # button twice and then the letter "t".

The Reboot Trick
1. Go to calendar ( menu - 8 )
2. Make note / reminder
3. Enter some text into the edit box
4. Hold clear until whole text is cleared, then press back
5. Press 0. Main screen is shown but a space appears on the screen. You can't see it of course.
6. Enter 4 digits ( 1234 for example )
7. Use the down arrow to move the cursor to the left side of the numbers and the space (2 times down arrow)
8. Now enter 6 digits and press the green "Call button".
9. Wait some seconds..the phone will now flash the background light and finally reboot.

Philips Genie Secrets

Samsung SGH600 Secrets

EEPROM Error Stack - Use side keys to select values. Cancel and ok.
*#9998*377#
Trace Watchdog
*#9998*427#

Test Vibrator - Flash the screenligth during 10 seconds and vibration activated
*#9998*842#

Sony CMDZ1 Secrets

Sagem RC712 Secrets

Siemens S1 Secrets

Tetris
Power on phone and enter PIN. before phone has locked onto network, F9, send own number, hit right button, hit 9. left is 2, right is 8, rotate is 5,
and drop is 4.

Monitor Mode
Menu, 9 (Phone Options), 7 (Phone Status), Left Display Button (left MENU key), 5553756, HangUp Button (Red HandSet key)
Now "Monitor" should appear at the bottom of the Network Options menu.
Pressing the right Display Button when in monitor mode will show a list of the
six cells with the strongest signals.

Trium MTD30 Secrets

Do you want to know what version of SW you have? IMEI number?

Below you have the secret codes for your cellphone. With these codes you can, without any problem, check the IMEI software version, reset to default language or deactivate simlock (only on some models). Some of the codes you see below must by typed without the SIM card in the cellphone and some with the SIM card in the phone. Please be careful! - with some of these codes you may block your cellphone.